1-5/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 24'W x 5'H
Welded Wire Horse Corral Panel
24'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1-7/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 24'W x 5'H
Welded Wire Horse Corral Panel
24'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1-5/8 Horse Corral Foaling Gate Panel 4-Rail With Welded Wire: 24'W x 5'H
Welded Wire Horse Corral Panel
24'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
|
1-7/8 Horse Corral Panel 4-Rail With Welded Wire: 24'W x 6'H
Welded Wire Horse Corral Panel
24'W 4-Rail Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16GA Galvanized Tubing
6GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
2" Legs
|
1 5/8" Horse Corral Gate: 6-Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Gate
24'W 6-Rail Corral Gate Panel with Welded Wire
Our welded wire gate panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
24'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
1 @ 24'W Mare & Foal Horse Bowgate
3 @ 24'W Mare & Foal Horse Corral Panels
8 @ Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
24'W x 24'D 1-5/8" 4-Rail Horse Corral with 8' x 24' Trussed Shelter
Horse Corral
4-Rail 1-5/8" Galvanized Horse Corral 24'W x 24'D
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
Includes:
Shelter Includes:
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
The corral panels are 5'H and the gate panel has a 6'W door.
24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
24'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
1 @ 24'W Mare & Foal Horse Bowgate
3 @ 24'W Mare & Foal Horse Corral Panels
1 @ 8'D x 24'W Trussed Horse Shelter Roof Panel
4 @ 8' L-Post Legs
1 @ 8' T-Post Leg
26 @ Panel Clamps
2 @ 90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Dual Mare & Foal Horse Corral 24'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 12'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 12' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Dual Mare & Foal Horse Corral 12'W x 24'D W/ 8'D x 12'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
8'D x 12W Trussed Horse Shelter Roof Panel
8' L-Post Legs
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Dual Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 24'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Dual Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
