1-5/8 Horse Corral Panel 3-Rail: 16'W x 5'H
Horse Corral Panel
16'W 3-Rail Panel
This horse corral panel can be used to replace a panel on your corral, arena, or round pen. You can also use it to build a custom size arena, round pen, or corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
Features:
5'H Panel
1-5/8 Horse Corral Panel 4-Rail: 16'W x 5'H
Horse Corral Panel
16'W 4-Rail Panel
This horse corral panel can be used to replace a panel on your corral, arena, or round pen. You can also use it to build a custom size arena, round pen, or corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
Features:
5'H Panel
1-7/8 Horse Corral Panel 3-Rail: 16'W x 5'H
Horse Corral Panel
16'W 3-Rail Panel
This horse corral panel can be used to replace a panel on your corral, arena, or round pen. You can also use it to build a custom size arena, round pen, or corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16GA Galvanized Tubing
Features:
1-5/8 Horse Corral Gate Panel 3-Rail: 16'W x 5'H
Horse Corral Gate Panel
16'W 3-Rail Gate Panel
This horse corral gate/ bowgate can be used to add or replace a gate on your corral or arena. You can also add corral panels to build your own custom size arenas and corrals.Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
Features:
5'H Panel
7.5'H x 6'W Bowgate
Welded Hinges
1-7/8 Horse Corral Panel 4-Rail: 16'W x 5'H
Horse Corral Panel
16'W 4-Rail Panel
This horse corral panel can be used to replace a panel on your corral, arena, or round pen. You can also use it to build a custom size arena, round pen, or corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16GA Galvanized Tubing
Features:
5'H Panel
1-5/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 12'W x 5'H
Welded Wire Horse Corral Panel
12'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1-5/8 Horse Corral Gate Panel 4-Rail: 16'W x 5'H
Horse Corral Gate Panel
16'W 4-Rail Gate Panel
This horse corral gate/ bowgate can be used to add or replace a gate on your corral or arena. You can also add corral panels to build your own custom size arenas and corrals.Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
Features:
5'H Panel
7.5'H x 6'W Bowgate
Welded Hinges
1-5/8 Horse Corral Panel 4-Rail With Welded Wire: 12'W x 6'H
Welded Wire Horse Corral Panel
12'W 4-Rail Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
6GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
2" Legs
This item can be picked up or delivered. Delivery charge ranges from $75 to $195 depending on the distance. We do not ship these outside of the Southern California area.
1-7/8 Horse Corral Gate Panel 3-Rail: 16'W x 5'H
1-7/8 Horse Corral Gate 3-Rail: 24'W x 5'H
This horse corral gate/ bowgate can be used to add or replace a gate on your corral or arena. You can also add corral panels to build your own custom size arenas and corrals. Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-7/8" 16GA Galvanized Tubing
Features:
5'H Panel
7.5'H x 6'W Bowgate
Welded Hinges
1-5/8 Horse Corral Gate Panel 5-Rail: 16'W x 5'H
Horse Corral Gate Panel
16'W 5-Rail Gate Panel
This horse corral gate/ bowgate can be used to add or replace a gate on your corral or arena. You can also add corral panels to build your own custom size arenas and corrals.Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
Features:
5'H Panel
7.5'H x 6'W Bowgate
Welded Hinges
1-7/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 12'W x 5'H
Welded Wire Horse Corral Panel
12'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1-5/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 16'W x 5'H
Welded Wire Horse Corral Panel
16'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1 5/8 Horse Corral Panel 5 Rail With Welded Wire: 12'W x 6'H
1 5/8" Horse Corral Panel: 5 Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Panel
12'W 5-Rail Horse Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral panel you are looking for we have you covered!
1 7/8 Horse Corral Panel 4 Rail With Welded Wire: 12'W x 6'H
1 7/8" Horse Corral Panel: 4 Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Panel
12'W 4-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-7/8 Horse Corral Gate Panel 4-Rail: 16'W x 5'H
Horse Corral Gate Panel
16'W 4-Rail Gate Panel
This horse corral gate/ bowgate can be used to add or replace a gate on your corral or arena. You can also add corral panels to build your own custom size arenas and corrals.Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-7/8" 16GA Galvanized Tubing
Features:
5'H Panel
7.5'H x 6'W Bowgate
Welded Hinges
1-5/8 Horse Corral Gate Panel 6-Rail: 16'W x 6'H
Horse Corral Gate Panel
16'W 6-Rail Gate Panel
This horse corral gate/ bowgate can be used to add or replace a gate on your corral or arena. You can also add corral panels to build your own custom size arenas and corrals.Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
Features:
6'H Panel
7.5'H x 6'W Bowgate
Welded Hinges
1-5/8 Horse Corral Foaling Gate Panel 4-Rail With Welded Wire: 12'W x 5'H
Mare and Foal Horse Corral Gate Panel
12'W 4-Rail Horse Corral Foaling Gate with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 5/8 Horse Corral Panel 6 Rail With Welded Wire: 12'W x 6'H
1 5/8" Horse Corral Panel: 6 Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Panel
12'W 6-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-7/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 16'W x 5'H
Welded Wire Horse Corral Panel
16'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1 5/8 Horse Corral Gate 4 Rail with Welded Wire: 12'W x 6'H
Welded Wire Horse Corral Gate
12'W 4-Rail Gate Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
6 GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
7.5' H x 6'W Door Frame
2" Legs
Lockable Sliding Door Latch
Welded Hinges
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1- 5/8 Horse Corral Panel 4-Rail With Welded Wire: 16'W x 6'H
Welded Wire Horse Corral Panel
16'W 4-Rail Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
6GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
2" Legs
|
1 7/8 Horse Corral Panel 5 Rail With Welded Wire: 12'W x 6'H
1 7/8" Horse Corral Panel: 5 Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Panel
12'W 5-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-7/8 Horse Corral Foaling Gate Panel 4-Rail With Welded Wire: 12'W x 5'H
Mare and Foal Horse Corral Gate Panel
12'W 4-Rail Horse Corral Foaling Gate with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1-5/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 24'W x 5'H
Welded Wire Horse Corral Panel
24'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1-5/8 Horse Corral Foaling Gate Panel 4-Rail With Welded Wire: 16'W x 5'H
Mare and Foal Horse Corral Gate Panel
16'W 4-Rail Horse Corral Foaling Gate with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-5/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1-7/8 Horse Corral Panel 4-Rail With Welded Wire: 16'W x 6'H
Welded Wire Horse Corral Panel
16'W 4-Rail Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16GA Galvanized Tubing
6GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
2" Legs
|
1 5/8" Horse Corral Gate: 5-Rail With Welded Wire: 12'W x 6'H
1 5/8" Horse Corral Gate: 5 Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Gate
12'W 5-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 5/8 Horse Corral Panel 5 Rail With Welded Wire: 16'W x 6'H
1 5/8" Horse Corral Panel: 5 Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Panel
16'W 5-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1 7/8 Horse Corral Panel 6 Rail With Welded Wire: 12'W x 6'H
1 7/8" Horse Corral Panel: 6 Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Panel
12'W 6-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-5/8 Horse Corral Gate 4-Rail With Welded Wire: 16'W x 6'H
Welded Wire Horse Corral Gate
16'W 4-Rail Gate Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Made with:
1-5/8" 16GA Galvanized Tubing
6 GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
7.5' H x 6'W Door Frame
2" Legs
Lockable Sliding Door Latch
Welded Hinges
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 5/8 Horse Corral Panel 6 Rail With Welded Wire: 16'W x 6'H
1 5/8" Horse Corral Panel: 6 Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Panel
16'W 6-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-7/8 Horse Corral Foaling Gate Panel 4-Rail With Welded Wire: 16'W x 5'H
Mare and Foal Horse Corral Gate Panel
16'W 4-Rail Horse Corral Foaling Gate with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 7/8 Horse Corral Panel 5 Rail With Welded Wire: 16'W x 6'H
1 7/8" Horse Corral Panel: 5 Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Panel
16'W 5-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-7/8 Horse Corral Foaling Panel 4-Rail With Welded Wire: 24'W x 5'H
Welded Wire Horse Corral Panel
24'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16 Gauge Galvanized Steel Tubing
6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features:
5'H Panel
3'H Wire Mesh
2" Legs
1 7/8" Horse Corral Gate 5-Rail With Welded Wire: 12'W x 6'H
1 7/8" Horse Corral Gate: 5-Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Gate
12'W 5-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1-5/8 Horse Corral Panel 4-Rail With Welded Wire: 24'W x 6'H
Welded Wire Horse Corral Panel
24'W 4-Rail Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral panel you are looking for we have you covered!
Made with:
1- 5/8" 16GA Galvanized Tubing
6GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
2" Legs
|
1 5/8" Horse Corral Gate: 5-Rail With Welded Wire: 16'W x 6'H
1 5/8" Horse Corral Gate: 5 Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Gate
16'W 5-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-5/8 Horse Corral Foaling Gate Panel 4-Rail With Welded Wire: 24'W x 5'H
Welded Wire Horse Corral Panel
24'W 4-Rail Horse Corral Foaling Panel with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with: 1-5/8" 16 Gauge Galvanized Steel Tubing 6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features: 5'H Panel 3'H Wire Mesh 6'W Bowgate 2" Legs
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
|
1 7/8" Horse Corral Gate: 6-Rail With Welded Wire: 12'W x 6'H
1 7/8" Horse Corral Gate: 6 Rail With Welded Wire: 12'W x 6'H
Welded Wire
Horse Corral Gate
12'W 6-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 7/8" Horse Corral Gate: 4-Rail With Welded Wire: 16'W x 6'H
1 7/8" Horse Corral Gate: 4-Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Gate
16'W 4-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 7/8 Horse Corral Panel 6 Rail With Welded Wire: 16'W x 6'H
1 7/8" Horse Corral Panel: 6 Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Panel
16'W 6-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1-7/8 Horse Corral Panel 4-Rail With Welded Wire: 24'W x 6'H
Welded Wire Horse Corral Panel
24'W 4-Rail Panel with Stud Wire
Our stud panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral panel you are looking for we have you covered!
Made with:
1-7/8" 16GA Galvanized Tubing
6GA Wire Mesh with 2" x 4" Opening
Features:
6'H Wired Panel
2" Legs
|
8'W x 8'D 1-3/8" 3-Rail Mini Horse Corral
Mini Horse Corral
3-Rail 1-3/8" Galvanized Mini Horse Corral 8'W x 8'D
Made With:
1-3/8" 18 Gauge Galvanized Steel Tube
These mini horse corrals are perfect for miniature horses, ponies and livestock.
Includes:
8'W Mini Horse Bowgate
8'W Mini Horse Corral Panels
1 3/8" Panel Clamps
The corral panels are 3'H. The gate panel has a 4'W door and is 6'H.
1 5/8 Horse Corral Panel 5 Rail With Welded Wire: 24'W x 6'H
1 5/8" Horse Corral Panel: 5-Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Panel
24'W 5-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1 5/8" Horse Corral Gate: 6-Rail With Welded Wire: 16'W x 6'H
1 5/8" Horse Corral Gate: 6-Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Gate
16'W 6-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 5/8" Horse Corral Gate: 4-Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Gate
24'W 4-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 7/8" Horse Corral Gate: 5-Rail With Welded Wire: 16'W x 6'H
1 7/8" Horse Corral Gate: 5-Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Gate
16'W 5-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1-7/8 Horse Corral Foaling Gate Panel 4-Rail With Welded Wire: 24'W x 5'H
Mare and Foal Horse Corral Gate Panel 24'W 4-Rail Horse Corral Foaling Gate with Welded Wire
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as amare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made with: 1-7/8" 16 Gauge Galvanized Steel Tubing 6 Gauge Galvanized Welded Wire Mesh 2" x 4" opening
Features: 5'H Panel 3'H Wire Mesh 6'W Bowgate 2" Legs
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
|
1 5/8 Horse Corral Panel 6 Rail With Welded Wire: 24'W x 6'H
1 5/8" Horse Corral Panel: 6 Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Panel
24'W 6-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1 7/8 Horse Corral Panel 5 Rail With Welded Wire: 24'W x 6'H
1 7/8" Horse Corral Panel: 5 Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Panel
24'W 5-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1 5/8" Horse Corral Gate: 5-Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Gate
24'W 5-Rail Corral Gate Panel with Welded Wire
Our welded wire gate panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 7/8" Horse Corral Gate 6-Rail With Welded Wire: 16'W x 6'H
1 7/8" Horse Corral Gate: 6-Rail With Welded Wire: 16'W x 6'H
Welded Wire
Horse Corral Gate
16'W 6-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
8'W x 8'D 1-3/8" 4-Rail Mini Horse Corral
Mini Horse Corral
4-Rail 1-3/8" Galvanized Mini Horse Corral 8'W x 8'D
Made With:
1-3/8" 18 Gauge Galvanized Steel Tube
These mini horse corrals are perfect for miniature horses, ponies and livestock.
Includes:
8'W Mini Horse Bowgate
8'W Mini Horse Corral Panels
1 3/8" Panel Clamps
The corral panels are 3'H. The gate panel has a 4'W door and is 6'H.
12'W x 12'D 1-3/8" 3-Rail Mini Horse Corral
Horse Corral
3-Rail 1-3/8" Galvanized Mini Horse Corral 12'W x 12'D
Made With:
1-3/8" 18 Gauge Galvanized Steel Tube
Includes:
12'W Mini Horse Bowgate
12'W Mini Horse Corral Panels
Panel Clamps
The mini corral panels are 3'H. The gate panel has a 4'W door and is 6'H.
These mini horse corrals are perfect for miniature horses, ponies and livestock.
1 7/8" Horse Corral Gate 4-Rail With Welded Wire: 24'W x 6'H
1 7/8" Horse Corral Gate: 4 Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Gate
24'W 4-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 7/8 Horse Corral Panel 6 Rail With Welded Wire: 24'W x 6'H
1 7/8" Horse Corral Panel: 6 Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Panel
24'W 6-Rail Corral Panel with Welded Wire
Our welded wire panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
1 5/8" Horse Corral Gate: 6-Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Gate
24'W 6-Rail Corral Gate Panel with Welded Wire
Our welded wire gate panels are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
1 7/8" Horse Corral Gate: 5-Rail With Welded Wire: 24'W x 6'H
1 7/8" Horse Corral Gate: 5 Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Gate
24'W 5-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
8'W x 8'D 1-3/8" 2-Rail Mini Horse Corral w/ Welded Wire
Mini Horse Corral
2-Rail 1-3/8" Galvanized Mini Horse Corral 8'W x 8'D
These mini horse corrals are perfect for miniature horses, ponies and livestock.
Made With:
1-3/8" 18 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
8'W Mini Horse Bowgate
8'W Mini Horse Corral Panels
1 3/8" Panel Clamps
The corral panels are 3'H. The gate panel has a 4'W door and is 6'H.
12'W x 12'D 1-3/8" 4-Rail Mini Horse Corral
Horse Corral
4-Rail 1-3/8" Galvanized Mini Horse Corral 12'W x 12'D
Made With:
1-3/8" 18 Gauge Galvanized Steel Tube
Includes:
12'W Mini Horse Bowgate
12'W Mini Horse Corral Panels
Panel Clamps
The mini corral panels are 3'H. The gate panel has a 4'W door and is 6'H.
1 7/8 Horse Corral Gate 6 Rail With Welded Wire: 24'W x 6'H
1 7/8" Horse Corral Gate: 6-Rail With Welded Wire: 24'W x 6'H
Welded Wire
Horse Corral Gate
24'W 6-Rail Corral Gate with Welded Wire
Our welded wire corral gates are great for keeping your stallion safe and secure. They are also an excellent choice for your mare and foals. Whatever type of corral gate panel you are looking for we have you covered!
Proper way to carry a gate panel:
Because of the weight and length of the gate panels, (especially the ones with welded wire), it is strongly recommended that all gate panels are carried in an upright or standing position. At the point where the panel is connected to the Gate frame, it creates a twist that can cause the pipe to split or collapse along the welded seam. Cactus Horse Corrals is not responsible for damage sustained as a result of mishandling or misuse.
16'W x 16'D 1-5/8" 3-Rail Horse Corral
Horse Corral
3-Rail 1-5/8" Galvanized Horse Corral 16'W x 16'D
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
Includes:
The corral panels are 5'H and the gate panel has a 6'W door.
12'W x 12'D 1-3/8" 2-Rail Mini Horse Corral w/ Welded Wire
Mini Horse Corral
2-Rail 1-3/8" Galvanized Mini Horse Corral 12'W x 12'D
These mini horse corrals are perfect for miniature horses, ponies and livestock.
Made With:
1-3/8" 18 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
12'W Mini Horse Bowgate
12'W Mini Horse Corral Panels
3/8" Panel Clamps
The corral panels are 3'H. The gate panel has a 4'W door and is 6'H.
16'W x 16'D 1-5/8" 4-Rail Horse Corral
Horse Corral
4-Rail 1-5/8" Galvanized Horse Corral 16'W x 16'D
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
Includes:
The corral panels are 5'H and the gate panel has a 6'W door.
16'W x 16'D 1-7/8" 3-Rail Horse Corral
Horse Corral
3-Rail 1-7/8" Galvanized Horse Corral 16'W x 16'D
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
Includes:
The corral panels are 5'H and the gate panel has a 6'W door.
12'W x 12'D 1-3/8" 2-Rail Mini Horse Corral w/ Welded Wire & 6' x 12' Trussed Shelter
Mini Horse Corral
2-Rail 1-3/8" Galvanized Mini Horse Corral w/Welded Wire 12'W x 12'D & 6' x 12' Trussed Shelter
These mini horse corrals are perfect for miniature horses, ponies and livestock.
Made With:
1-3/8" 18 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge Hi-Rib Sheet Metal
Includes:
12'W Mini Horse Bowgate
12'W Mini Horse Corral Panels
1 3/8" Panel Clamps
6' x 12' Trussed Shelter
The corral panels are 3'H. The gate panel has a 4'W door and is 6'H.
16'W x 16'D 1-5/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 16'W x 16'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
16'W Mare & Foal Horse Bowgate
16'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
12'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 12'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
12'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
16'W x 16'D 1-5/8" 3-Rail Horse Corral with 8' x 16' Trussed Shelter
Horse Corral
3-Rail 1-5/8" Galvanized Horse Corral 16'W x 16'D
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
Corral Includes:
Shelter Includes:
8'D x 16'W Horse Shelter Roof Panel
16'W Integrated Truss on One Side
8' L-Post Legs
8' T-Post Leg
Panel Clamps
The corral panels are 5'H and the gate panel has a 6'W door.
12'W x 24'D 1-5/8" 4-Rail Horse Corral W/ 8' x 12' Trussed Shelter
Horse Corral
4-Rail 1-5/8" Galvanized Horse Corral 12'W x 24'D W/ 8'D x 12'W Trussed Horse Shelter
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
26 Gauge PBR Sheet Metal
Includes:
12'W Bowgate
12'W Horse Corral Panels
24'W Horse Corral Panels
8'D x 12'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
24 - Panel Clamps
Features:
5'H Panel
6'W Bowgate
16'W x 16'D 1-7/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 16'W x 16'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
16'W Mare & Foal Horse Bowgate
16'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
16'W x 16'D 1-5/8" 4-Rail Horse Corral with 8' x 16' Trussed Shelter
Horse Corral
4-Rail 1-5/8" Galvanized Horse Corral 16'W x 16'D
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
Includes:
Shelter Includes:
8'D x 16'W Horse Shelter Roof Panel
16'W Integrated Truss on One Side
8' L-Post Legs
8' T-Post Leg
Panel Clamps
The corral panels are 5'H and the gate panel has a 6'W door.
12'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 12'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
12'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
16'W x 16'D 1-7/8" 3-Rail Horse Corral with 8' x 16' Trussed Shelter
Horse Corral
3-Rail 1-7/8" Galvanized Horse Corral 16'W x 16'D
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
Includes:
Shelter Includes:
8'D x 16'W Horse Shelter Roof Panel
16'W Integrated Truss on One Side
8' L-Post Legs
8' T-Post Leg
Panel Clamps
The corral panels are 5'H and the gate panel has a 6'W door.
16'W x 16'D 1-7/8" 4-Rail Horse Corral with 8' x 16' Trussed Shelter
Horse Corral
4-Rail 1-7/8" Galvanized Horse Corral 16'W x 16'D
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
Includes:
Shelter Includes:
8'D x 16'W Horse Shelter Roof Panel
16'W Integrated Truss on One Side
8' L-Post Legs
8' T-Post Leg
Panel Clamps
The corral panels are 5'H and the gate panel has a 6'W door.
24'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
1 @ 24'W Mare & Foal Horse Bowgate
3 @ 24'W Mare & Foal Horse Corral Panels
8 @ Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
12'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 12' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 12'W x 24'D W/ 8'D x 12'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
12'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
8'D x 12'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
24'W x 24'D 1-5/8" 4-Rail Horse Corral with 8' x 24' Trussed Shelter
Horse Corral
4-Rail 1-5/8" Galvanized Horse Corral 24'W x 24'D
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
Includes:
Shelter Includes:
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
The corral panels are 5'H and the gate panel has a 6'W door.
16'W x 16'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 16' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 16'W x 16'D W/ 8'D x 16'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
16'W Mare & Foal Horse Bowgate
16'W Mare & Foal Horse Corral Panels
8'D x 16'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
12' x 24' 1-7/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 12' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 12'W x 24'D W/ 8'D x 12'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
12'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
8'D x 12'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
16'W x 16'D 1-7/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 16' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 16'W x 16'D W/ 8'D x 16'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
16'W Mare & Foal Horse Bowgate
16'W Mare & Foal Horse Corral Panels
8'D x 16'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 12'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Dual Mare & Foal Horse Corral 12'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
12'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
24'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
1 @ 24'W Mare & Foal Horse Bowgate
3 @ 24'W Mare & Foal Horse Corral Panels
1 @ 8'D x 24'W Trussed Horse Shelter Roof Panel
4 @ 8' L-Post Legs
1 @ 8' T-Post Leg
26 @ Panel Clamps
2 @ 90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 12'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Dual Mare & Foal Horse Corral 12'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
12'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Dual Mare & Foal Horse Corral 24'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 24'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Dual Mare & Foal Horse Corral 24'W x 24'D
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
Includes:
2 @ 24'W Mare & Foal Horse Bowgate
5 @ 24'W Mare & Foal Horse Corral Panels
16 @ Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 12'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 12' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Dual Mare & Foal Horse Corral 12'W x 24'D W/ 8'D x 12'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
8'D x 12W Trussed Horse Shelter Roof Panel
8' L-Post Legs
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 12'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 12' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Dual Mare & Foal Horse Corral 12'W x 24'D W/ 8'D x 12'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
12'W Mare & Foal Horse Corral Panels
24'W Mare & Foal Horse Corral Panels
8'D x 12W Trussed Horse Shelter Roof Panel
8' L-Post Legs
Panel Clamps
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 24'W x 24'D 1-5/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-5/8" Galvanized Dual Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-5/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs
Dual 24'W x 24'D 1-7/8" 4-Rail Mare & Foal Horse Corral W/ 8' x 24' Trussed Shelter
Mare & Foal Horse Corral
4-Rail 1-7/8" Galvanized Dual Mare & Foal Horse Corral 24'W x 24'D W/ 8'D x 24'W Trussed Horse Shelter
The mesh on this panel goes up approximately 3'H. This panel is most commonly used as a mare/ foaling pen. The wire at the bottom of the panels helps prevent the mare from getting cast in the stall while foaling. It also prevents the foal from escaping until it has grown enough to be placed in a regular corral. Whatever type of corral panel you are looking for we have you covered!
Made With:
1-7/8" 16 Gauge Galvanized Steel Tube
6 GA Wire Mesh with 2" x 4" Opening
26 Gauge PBR Sheet Metal
Includes:
24'W Mare & Foal Horse Bowgate
24'W Mare & Foal Horse Corral Panels
8'D x 24'W Trussed Horse Shelter Roof Panel
8' L-Post Legs
8' T-Post Leg
Panel Clamps
90 Degree Panel Clamp
Features:
5'H Panel
3'H Wire Mesh
6'W Bowgate
2" Legs